Hammerdill/Drill/Driver
The hammerdrill/drill/driver packs awesome power with an added benefit: The half-inch chuck self-tightens while in hammer mode throughout operation, giving you the ultimate in bit-gripping strength. Three gears give you the perfect range for any application, with 0 to 6,800, 0 to 20,400 and an amazing 0 to 27,200 blows per minute in hammer mode. Likewise, speed ranges vary from 0 to 400 in low gear, 0 to 1,200 in second and a top range of 0 to 1,600 rpm. It's not overly heavy at about 7 pounds, considering it's powered by a walloping 36-volt battery. (It actually isn't any heavier than a standard 18-volt.) The balance is actually nice in hand, and there's absolutely no shortage in the power department.

Circular Saw and Recip Saw
It's a toss-up between the DC300 circular saw and the DC305 recip saw as far as our favorite in this combo. Each one performs superbly, with both massive power and professional finesse. Lever-actuated bevel adjustment on the circular saw is smooth and easy, with a 0- to 50-degree capacity, and there are on-the-money detents at 22-1/2 and 45 degrees. You'll have no complaints with the no-load speed of 4,000 rpm, either. We like the fact that you can change blades quickly and easily without tools and that the shoe and upper guard are constructed of high-strength magnesium. It's a powerhouse that's just a pleasure to use.

Likewise, the recip saw is aggressive and graceful all at once, with 0 to 3,000 strokes per minute and a max stroke length of 1-1/8 inches. The coolest feature undoubtedly is the four-position keyless blade clamp for super-easy blade changes and fantastic versatility. It's also easy on your body, keeping you from contorting to reach your workpiece. Instead of you twisting, you twist the blade and let the tool do the work. We like the comfort grip, giving you a secure hold as well as dampening any vibration you might feel. Don't need the full blade stroke? Easily managed with the three-position adjustable shoe - saves blade life, too.

Flexible Floodlight
Finally, the DC509 flexible floodlight is a particular favorite of ours because of the Flex-Neck design and lockable head clips. It stands alone, it hangs - whatever you need it to do. The beam is quite a bit brighter and broader than that of a conventional flashlight because of the wide-angle Xenon bulb. And a fully charged battery will give you a whole workshift of illumination.

The kit box is a little crowded, but we don't think the tools will spend much time inside it - they'll be on the job.

Dewalt's Revolutionary 36V Battery
The 36-volt cordless battery platform was developed to provide professional contractors with the performance needed to complete high-powered applications that were previously only possible with corded tools. By partnering with A123 Systems -- a developer of a new generation of lithium-ion batteries developed at and exclusively licensed from the Massachusetts Institute of Technology (MIT) -- Dewalt's 36V line of tools are equipped with a unique Nano-Phosphate lithium-ion design. These revolutionary batteries offers a high level of power, long run-time and durability when compared to conventional lithium technology. In fact, this technology delivers a battery with a maximum life of over 2,000 recharges a nd no frustrating battery memory. With this breakthrough innovation, this 36-volt tool is sure to live up to Dewalt's commitment to providing Guaranteed Tough products for the professional end user.

Note: Do not try to discharge the battery beyond the point where the tool no longer performs with the power needed for the job. This may cause permanent damage and prevent the battery from taking a full charge in the future. Do not tape the trigger on the tool to discharge the battery. --Kris Jensen-Van Heste

Product Description
This Factory Reconditioned combo kit features four 36-volt power tools including a 1/2-inch hammer-drill, a 7-1/4 inch circular saw, a powerful reciprocating saw, and a flexible floodlight.

The DC900 hammerdrill/drill/driver comes equipped with an all new DEWALT-built high power, high efficiency motor that delivers maximum performance in all drilling and fastening applications. The DC900 delivers a max power rating of 750 unit watts out (UWO).

The DC900 power rating is indicative of providing the user with corded performance with cordless versatility. The DC900 is designed with a patented 3-speed transmission that maximizes the speed applied to each application, offering professional end users optimal performance for various applications. The hammerdrill also features a -inch self-tightening chuck, which enables the chuck to automatically tighten throughout operation.

The reciprocating saw features a patented 4-Position keyless blade clamp that offers more versatility when flush cutting and in hard to reach areas. The circular saw offers a full sized, 7-1/4 blade for increased cutting capacity, a keyless blade change and a 50-degree lever action bevel system with detents at 22.5 and 45 degrees.

The flexible floodlight in this kit features a universally flexible neck that points the beam in any direction, and offers up to eight hours of continuous lighting on a single charge. The DEWALT exclusive 36V nano-phosphate lithium ion battery weighs the same as an 18V NiCd battery, delivers twice the power and runtime of 18V and 2,000 recharges.

Kit includes a one-hour charger, two 36 Volt batteries, side handle, rip fence, blades and a heavy duty kitbox.